Agitated Immersion Multi-Tank Passivation Systems

Agitated immersion tanks are used for passivation as they are designed for precision cleaning using water based detergents and citric acid.

Multi-Stage Passivation System

Ultrasonic Wash – Rinse – Acid Passivate- Rinse – Dry System

Agitating parts washers and systems use a simple yet rugged designed pneumatically powered reciprocating platform to agitate your parts in the water or solvent based detergent.  This action coupled with options like ultrasonics,  exclusive high flow filtration and turbulation, and oil removal systems ensure all oil and particulate are removed from not only the outside of your parts but also the internal cavities/passages that other types of parts washing systems can’t properly clean.

Once cleaned and rinsed, the parts are immersed in citric acid to perform the passivation process of removing free irons from the surface of the parts.

Automated Multi-Stage Ultrasonic Passivation Systems

Wash – Rinse – Passivate- Rinse – Dry System

These immersion tank washers are fully modular allowing for multiple tanks placed side by side allowing for any applications specific configuration: wash, rinse, dry or wash, rinse, rinse, dry or wash, rinse, passivate, rinse dry, etc as shown above.

Common Applications for Passivation Systems

This superior part exterior and part internals flushing action makes our parts washers excellent for:

• Citric acid passivation type 1, 2, 3, 4, & 5 ASTM A967 using Stellar Solution’s Citrisurf
• Cleaning and passivating of parts with lots of internal passageways like casting and cylinder blocks
• Medical and aerospace parts which require critical cleaning requirements

Typical Configurations

We offer 9 standard configurations shown and custom sizing up to 4000lbs load capacity and any working zone configuration.