Front Load Spray Cabinet Parts Washer

Best Technology offers the highest quality front load parts washers in industry and the specifications below prove it. Whether your part cleaning application is heavy engine blocks loaded with grease and grime or you are cleaning industrial machine components, these spray parts washers are up to your most demanding parts washing applications.

Front Loading Spray Cabinet Parts Washer – Closed

 

Standard Equipment

Mechanical-

• Gear Driven Turntable – no turntable slipping from poor quality belt, chain, rubber tire, brush wheel, etc engagement
• Vertical Pump Systems – the ultimate in pump reliability
• Mechanical Labyrinth Door Seals ~ No rubberized seals that will leak and need replacing!
• Swing away Spray Manifolds – For better impingement on smaller parts
• Large Swing-Out Doors for Full Access ~ there is not a more accessible turntable in industry.
• Roll-out turntable design – <42″ turntables
• V-notch door for >42″ turntables
• Stainless Steel bushed nozzles
• Option Ready – come ready for simple Plug-N-Play option installation in-field

Electrical-

• Watlow Heat Elements
• Low Water Shut-Off – Protect your heat elements from low water conditions – no more burnt out heating elements from running the system dry
• Industrial Control Panel ~ NEMA rated electrical closure featuring IEC components with rotary illuminated cam switches. Meets NFPA wiring standards for numbering, sizing, color coding, and overload protection.
• Various Voltages Available ~ 230v 1-phase, 208v 3-phase, 230v 3-phase, 460v 3-phase, 575v 3-phase, Canadian CSA standards and Industrial Upgrades.

Front Loading Spray Cabinet Parts Washer – Open

Optional Equipment:

• Rinse stage: re-circulating and non-recirculating
• Heated and non heated blow off stages
• Stainless steel disc oil skimmer
• Oil coalescing systems
• Stainless steel construction upgrade – SS cabinet or all wetted components
• Auto water fill – ensure the system always has enough water
• Filtration system – particulate micron bag filtration
• 1 or 2 function timers
• Sludge extraction systems
• Steam exhaust systems
• Pump upgrades – higher pressure, higher flowrate
• Heat upgrades
• Weight capacity upgrades
• Energy saving gas and steam heat options vs. electric heat
• Insulation packages
• Electrical service disconnects
• Dual stacking turntable options

Typical Front Load Spray Cabinet Industrial Parts Washer Configurations (Custom Sizing Available)

With over 17 standard models to choose from, and custom units with turntable diameters up to 120” and weight capacities up to 50,000 pounds, you can choose from one of the most diverse spray cabinet parts washer offerings in industry.

Turntable Diameter(in)	Inside Working Height (in)	Weight Capacity (lb)	Pump  (hp)	Pump Output (psi/gpm)	Solution Capacity (gallons)	Heat Source (kw)	Turntable Door Design	Overall Dimensions (l x w x h)
25	32	1000	3	52/35	95	9	Roll-Out	52 X 43 X 60
31	36	1000	3	52/35	140	12	Roll-Out	55 X 49 X 64
31	42	1000	5	80/85	140	12	Roll-Out	55 x 49 x 70
31	48	1000	5	80/85	140	12	Roll-Out	55 X 49 X 76
36	42	1500	5	80/85	180	18	Roll-Out	67 X 54 X 76
36	48	1500	5	80/85	180	18	Roll-Out	67 X 54 X 82
36	60	1500	7.5	75/120	180	18	Roll-Out	67 X 54 X 94
42	55	1500	7.5	75/120	240	18	Roll-Out	73 X 63 X 90
42	60	1500	7.5	75/120	240	18	Roll-Out	73 X 63 X 95
42	72	1500	10	75/150	240	36	“V” Notch tower	73 x 63 x 107
50	60	1500	15	75/200	300	36	V” Notch tower	69 X 81 X 95
50	72	1500	15	75/200	300	36	V” Notch tower	69 X 81 X 107
60	60	1500	15	75/200	400	36	V” Notch tower	79 X 91 X 96
60	72	1500	15	75/200	400	36	V” Notch tower	79 X 91 X 108
72	60	2000	15	75/200	550	36	V” Notch tower	91 X 103 X 97
72	72	2000	15	75/200	550	36	V” Notch tower	91 X 103 X 109