612.392.2414 
Solvent recovery and chemical disposal can become an expensive yet unplanned cost for solvent processes like vapor degreasing. Solvent recycling equipment can separate and remove soils, debris and oils from solvent through a process called distillation. These used solvent recovery systems can recycle most cleaning solvents, reduce solvent purchases by 95%+ and chemical waste disposal cost […]
How clean is clean? Clean specification test methods for parts cleaning
Best Technology often asks “How clean do your parts need to be?” but many times our customers just know they need to be “clean”. Since clean is relative for every application, it is important to understand part cleanliness and various clean test specifications. The important aspect in parts cleaning systems is understanding the post cleaning process which […]
Small Tabletop Ultrasonic Clean, Rinse and Dry Tank System for Cellular Manufacturing
Cellular manufacturing cleaning equipment requires the same type of part cleaning manufacturing systems seen on a line/centralized style cleaning but are typically smaller ultrasonic cleaners. The 386 tabletop washer ultrasonic cleaning system provides an ultrasonic wash, ultrasonic overflowing rinse and heated dry all in one compact bench top system. With tanks measuring 9.5″ x 5.5″ […]
Automated Precision Aqueous Cleaning in a Lean Cellular Manufacturing Design
The LC-360 Series of aqueous cleaning machines are a perfect solution for your cellular cleaning needs. Starting with a single basket system that takes up less than 20 square feet of plant floor space. These aqueous parts cleaning systems are built for lean manufacturing environments where manufacturing plant floor space is a premium (cleanroom, dry room, etc) but […]
Oil Coalescer, Belt Skimmer, and Oil Removal Systems
The world of physics teaches us a simple truth: things don’t just disappear or cease to be. They can change state – water can become ice or steam based on temperature, but it doesn’t just cease to be. Even with evaporation the water vapor still exists. This same basic truth impacts you every time you […]
Part Cleaning Selection Guide
When selecting equipment for cleaning, each unique customer application dictates the type of industrial part washing and cleaning equipment needed to properly remove particulate, oils, coolants and the like for the next step in the manufacturing process. Heavy Industrial Parts Washing Parts that are heavily coated in grease, oils, hydraulic fluid or other gross amounts […]
Immersible Ultrasonic Transducers | Submersible Ultrasonics Cleaners
System Description Common Applications Common Configurations Immersible ultrasonic transducers are sealed stainless steel enclosures which allow for adding ultrasonics to parts cleaning new tanks or adding onto existing tanks, equipment and systems. This addition allow for uniform precision parts cleaning of the part surface by using ultrasonic frequencies to cavitate the aqueous solution molecules […]
Automated Cleaning and Passivation Systems – FAQ
Below are some frequently asked questions about our automated cleaning and passivation systems which actually move the solutions rather than a traditional system where the parts move from tank to tank Do you need any agitation beyond ultrasonics during the cleaning and/or passivation process operation with the automated cleaning and system? There is in process […]
Small Automated Ultrasonic Part Cleaning Equipment & Systems
System Description Common Applications Common Configurations Case Studies Our small automatic parts washers are a perfect fit for small parts in cellular based manufacturing environments such as medical device manufacturing, aerospace manufacturing, machine shops and job shops. The automated part cleaning equipment performs an automated process of cleaning, rinsing, optional secondary rinsing, and drying by moving […]
What is Total Dissolved Solids or TDS in water for parts cleaning?
What is TDS in water? Total dissolved solids (TDS) is the term used to describe the inorganic salts and small amounts of organic matter present in solution in water. These salts dissociate in water to form ions which means it has two parts: one with a positive charge and one with a negative charge, which […]
