When a manufacturer needs to prepare metal parts for coating, painting, or another downstream finishing process, a phosphate stage might be one part of the equation. The parts must first be cleaned properly, the chemistry must operate under controlled conditions, rinsing must be incorporated at the right points, and the equipment needs to support a […]
Parts Washers Case Studies - Case Studies
Pipe and Tube Cleaning Equipment
Tube and pipe cleaning present a difficult challenge in part washing because cleaning solution must flow through the pipe in order to properly clean. Various cleaning methods exist for short tubes with adequate internal diameter (ID), but when the aspect ratio length:ID increases, it becomes necessary to force solution flow through the pipe itself. When the aspect […]
Job Shop Parts Washer for True Oil and Water Soluble Precision Parts
Application Machine shops often need to wash parts that come out of machining centers with true oils (petroleum based) as well as water soluble coolants. In this application, the customer had a long list of true oils they needed to remove from precision machined parts. Oil contaminants include: Mobil DTE Oil Heavy 100 ISO VG 100 […]
Oil Coalescer, Belt Skimmer, and Oil Removal Systems
The world of physics teaches us a simple truth: things don’t just disappear or cease to be. They can change state – water can become ice or steam based on temperature, but it doesn’t just cease to be. Even with evaporation the water vapor still exists. This same basic truth impacts you every time you […]
Machine Shop Parts Washer for Swiss and CNC Precision Parts
Parts Cleaner Machine Application Machine shops often need to wash parts that come out of machining centers with true oils (petroleum based) as well as water soluble coolants. Most tool shops start with a simple drum mounted solvent parts washer equipment but quickly outgrow the size and capabilities because it can only clean true oil […]
Automated Ultrasonic Injection Mold Cleaner System
The automated ultrasonic cleaning system washes, rinses, and dries various sizes of injection molds to remove resin gas buildup formed during plastic injection molding. The system is capable of processing 250 lb molds with additional capacity of overhead hoist to hold the molds during cleaning. The injection mold cleaner system consists of a 70 gallon, […]
Automotive Parts Washer Cleaning System for Turbocharger & Engine Rebuild
Automotive Parts Washer Cleaning Application The MKT Wash-Rinse-Dry parts washer cleaning system is an automotive parts washer designed for precision cleaning, rinsing, and drying of turbocharger, fuel system, and general engine rebuild components. The system uses ultrasonic cleaning to remove fine particulate and an oil removal system to separate true oils from part surfaces. Ultrasonic […]
612.392.2414
