Customer Application One of the most difficult window treatments to cleaning either residential homes or commercial offices are window blinds. Trying to dust a window blind with a duster or vacuum only goes cleans just what can be lifted off by wiping, but years of dust and grime need to be scrubbed to loosen the […]
Case Studies and Applications
Electronic Cigarette High Speed Polishing Equipment
Application Electronic cigarettes or e-cigarettes (ecigs) have become extremely popular alternative to smoking especially with Clean Air Act smoking bans in most restaurant, bars and other public areas. With this new trend of popularity, people want to differentiate themselves by nice looking pen cigarettes that are sparkling, shiny and highly polished. Most ecigarettes are made […]
Electropolishing Wet Bench with Nitric Acid Neutralization / Passivation
Acid Neutralization Application The medical device electropolishing wet bench has multiple polypropylene tanks to electropolish, rinse, nitric acid passivate / neutralize, and 2 final cascade overflow rinse tanks. This electropolishing wet bench has incoming parts already cleaned so electropolishing is the first stage. Other wet bench systems can have part cleaning and rinsing before the […]
Automated Ultrasonic Injection Mold Cleaner System
The automated ultrasonic cleaning system washes, rinses, and dries various sizes of injection molds to remove resin gas buildup formed during plastic injection molding. The system is capable of processing 250 lb molds with additional capacity of overhead hoist to hold the molds during cleaning. The injection mold cleaner system consists of a 70 gallon, […]
Deburring Machine for Medical Device Surgical Parts – Centrifugal Barrel Mass Finishing System
Medical Device Parts Deburring Application The centrifugal barrel mass finishing system processes biopsy jaw medical device surgical parts to deburr the parts after they are stamped with a multistage progressive die. Deburring medical device surgical parts that are highly complex and as small as the tip of your pinky finger would take hours if not […]
Automated Ultrasonic Citric / Nitric Acid Passivation Equipment for Medical Device and General Parts
Application for Medical Device Passivation Case Study The automated ultrasonic passivation system processes medical device industry parts with precision part cleaning and nitric or citric acid passivation after machining and/or laser mark. The system is able to passivate the following grades of stainless steel: 17-4, 304, 316, various 400 series and the like with a neutral […]
Automotive Parts Washer Cleaning System for Turbocharger & Engine Rebuild
Automotive Parts Cleaning Application The MKT Wash-Rinse-Dry parts washer cleaning system processes automotive industry parts with precision part cleaning, rinsing and drying. This automotive parts washer is capable of cleaning various automotive parts including turbocharger, fuel system and general engine rebuild components which require ultrasonic cleaning to remove fine particulate and an oil removal system […]
Manual Benchtop Ultrasonic Citric Passivation System for Medical Device Parts
Application The benchtop ultrasonic citric passivation system processes medical device industry parts with precision part cleaning and passivation after machining and laser mark. The customer, Integrated Technology , is able to passivate the following grades of stainless steel: 17-4, 304 and 316 with a neutral pH alkaline cleaner and CitriSurf® 2250. Other stainless steel grades are possible […]
Medical Device Guidewire Automated Ultrasonic Cleaning and Passivation System
Application Medical device sterilization requires guide wire cleaning and passivation after grinding and processing. The parts are bundled and have a film of grinding particulate and oil coating them. The system is able to clean the wires in a combine bundle rather than separated individually. The automated wash-rinse-passivate-rinse-final rinse combined with the ability to process bundles of […]